Results 1 to 3 of 3

Thread: JRSC squeeling at high RPM

  1. #1
    Inactive Member JRSC2001GSR's Avatar
    Join Date
    November 11th, 2002
    Posts
    2
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)
    My supercharger just started this tonight. At around 5,500+RPM my supercharger (or belt) is making a really loud screeching squealing noise, it's not peircing loud just loud. I think the belt might be slipping, although the belt is still tight. What are your opinions? Also what is the JRSC stock belt size, 620mm?

  2. #2
    HB Forum Owner 96IntegraRS's Avatar
    Join Date
    July 2nd, 2000
    Posts
    657
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Do a search.

    1. The belt is loose.
    2. The belt is worn.
    3. Search for the size.
    4. Something else is screwed, in which case figure out what and post it up.

    Welcome to the board! As you have noticed, SEARCH is the thing around here [img]smile.gif[/img]

  3. #3
    Inactive Member cpa's Avatar
    Join Date
    March 24th, 2000
    Posts
    486
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    I just went through this. I tightened my crank pulley to alternator belt a bit, even though I thought it was tight, and it helped for a day or two. Squealed again, so I replaced the belt. No more squealing. The belt didn't even look that bad, had some cracks across the ribs here and there, but that's about it. If you're losing boost pressure up top with the squeal something is loose or slipping.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •